←Select platform

Save(string,AnnContainer[],AnnCodecsFormat) Method

Summary

Saves an array of AnnContainer to a multipage annotation disk file

Syntax

C#
VB
C++
public void Save( 
   string fileName, 
   AnnContainer[] containers, 
   AnnCodecsFormat format 
) 
  
Public Overloads Sub Save( _ 
   ByVal fileName As String, _ 
   ByVal containers() As Leadtools.Annotations.AnnContainer, _ 
   ByVal format As Leadtools.Annotations.AnnCodecsFormat _ 
)  

Parameters

fileName
The output file name.

containers
An array of AnnContainer containing the objects to be saved.

format
An AnnCodecsFormat value that specifies the annotation format to use when saving.

Remarks

This method saves the entire array of AnnContainer as a multipage annotation file, with each page corresponding to one of the AnnContainer. If fileName already exists, it will be overwritten. If containers contain many AnnContainer, then this method will create the multipage annotation file much faster than repeated calls to Save(string,anncontainer,anncodecsformat,int32,anncodecssavepagemode)

This method only supports the AnnCodecsFormat.Xml format. All other AnnCodecsFormat are not supported.

For more information, refer to Annotation Files (Deprecated).

Example

C#
VB
using Leadtools; 
using Leadtools.Annotations; 
using Leadtools.Codecs; 
using Leadtools.WinForms; 
 
public void AnnCodecs_Save2() 
{ 
   // create three  annotation containers 
 
   // The first container contains a rectangle object 
   AnnContainer container0 = new AnnContainer(); 
   AnnRectangleObject rectObj = new AnnRectangleObject(); 
   rectObj.Bounds = new AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel); 
   rectObj.Pen = new AnnPen(Color.Blue, new AnnLength(1, AnnUnit.Pixel)); 
   rectObj.Brush = null; 
   container0.Objects.Add(rectObj); 
 
   // The second container contains a line object 
   AnnContainer container1 = new AnnContainer(); 
   AnnLineObject lineObj = new AnnLineObject(); 
   lineObj.StartPoint = new AnnPoint(100, 100, AnnUnit.Pixel); 
   lineObj.EndPoint = new AnnPoint(200, 200, AnnUnit.Pixel); 
   lineObj.Pen = new AnnPen(Color.Red, new AnnLength(1, AnnUnit.Pixel)); 
   container1.Objects.Add(lineObj); 
 
   // The third container contains a ellipse object 
   AnnContainer container2 = new AnnContainer(); 
   AnnEllipseObject ellipseObj = new AnnEllipseObject(); 
   ellipseObj.Bounds = new AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel); 
   ellipseObj.Pen = new AnnPen(Color.Blue, new AnnLength(1, AnnUnit.Pixel)); 
   ellipseObj.Brush = null; 
   container2.Objects.Add(ellipseObj); 
 
   // create a file to save both annotation containers 
   string annFileName = Path.GetTempFileName(); 
 
   // create a new AnnCodecs class 
   AnnCodecs codecs = new AnnCodecs(); 
 
   // save both AnnContainers into the stream 
   codecs.Save(annFileName, container0, AnnCodecsFormat.Xml, 1, AnnCodecsSavePageMode.Overwrite); 
   codecs.Save(annFileName, container1, AnnCodecsFormat.Xml, 2, AnnCodecsSavePageMode.Insert); 
 
   // Now load both containers from the stream, and verify that there are two containers 
   AnnContainer[] containersTwo = codecs.Load(annFileName); 
   MessageBox.Show(String.Format("After Load: there should be 2 containers.  Total number of containers: {0}", containersTwo.Length)); 
 
   // Add another container, and save to the stream 
   AnnContainer[] containersNew = new AnnContainer[containersTwo.Length + 1]; 
   Array.Copy(containersTwo, containersNew, containersTwo.Length); 
   containersNew[2] = container2; 
 
   codecs.Save(annFileName, containersNew, AnnCodecsFormat.Xml); 
 
   // Load and verify that there are three containers 
   AnnContainer[] containersThree = codecs.Load(annFileName); 
   MessageBox.Show(String.Format("After Load: there should be 3 containers.  Total number of containers: {0}", containersThree.Length)); 
} 
Imports Leadtools 
Imports Leadtools.Annotations 
Imports Leadtools.Codecs 
Imports Leadtools.WinForms 
 
Public Sub AnnCodecs_Save2() 
   ' create three  annotation containers 
 
   ' The first container contains a rectangle object 
   Dim container0 As New AnnContainer() 
   Dim rectObj As New AnnRectangleObject() 
   rectObj.Bounds = New AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel) 
   rectObj.Pen = New AnnPen(Color.Blue, New AnnLength(1, AnnUnit.Pixel)) 
   rectObj.Brush = Nothing 
   container0.Objects.Add(rectObj) 
 
   ' The second container contains a line object 
   Dim container1 As New AnnContainer() 
   Dim lineObj As New AnnLineObject() 
   lineObj.StartPoint = New AnnPoint(100, 100, AnnUnit.Pixel) 
   lineObj.EndPoint = New AnnPoint(200, 200, AnnUnit.Pixel) 
   lineObj.Pen = New AnnPen(Color.Red, New AnnLength(1, AnnUnit.Pixel)) 
   container1.Objects.Add(lineObj) 
 
   ' The third container contains a ellipse object 
   Dim container2 As New AnnContainer() 
   Dim ellipseObj As New AnnEllipseObject() 
   ellipseObj.Bounds = New AnnRectangle(100, 100, 100, 100, AnnUnit.Pixel) 
   ellipseObj.Pen = New AnnPen(Color.Blue, New AnnLength(1, AnnUnit.Pixel)) 
   ellipseObj.Brush = Nothing 
   container2.Objects.Add(ellipseObj) 
 
   ' create a file to save both annotation containers 
   Dim annFileName As String = Path.GetTempFileName() 
 
   ' create a new AnnCodecs class 
   Dim codecs As New AnnCodecs() 
 
   ' save both AnnContainers into the stream 
   codecs.Save(annFileName, container0, AnnCodecsFormat.Xml, 1, AnnCodecsSavePageMode.Overwrite) 
   codecs.Save(annFileName, container1, AnnCodecsFormat.Xml, 2, AnnCodecsSavePageMode.Insert) 
 
   ' Now load both containers from the stream, and verify that there are two containers 
   Dim containersTwo() As AnnContainer = codecs.Load(annFileName) 
   MessageBox.Show(String.Format("After Load: there should be 2 containers.  Total number of containers: {0}", containersTwo.Length)) 
 
   ' Add another container, and save to the stream 
   Dim containersNew(containersTwo.Length) As AnnContainer 
   Array.Copy(containersTwo, containersNew, containersTwo.Length) 
   containersNew(2) = container2 
 
   codecs.Save(annFileName, containersNew, AnnCodecsFormat.Xml) 
 
   ' Load and verify that there are three containers 
   Dim containersThree() As AnnContainer = codecs.Load(annFileName) 
   MessageBox.Show(String.Format("After Load: there should be 3 containers.  Total number of containers: {0}", containersThree.Length)) 
End Sub 

Requirements

Target Platforms

Help Version 19.0.2017.10.27
Products | Support | Contact Us | Copyright Notices
© 1991-2017 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Annotations Assembly